Home >> Products >> Ion equipment series >> ESD system tester>>Maxace 600 Static-Check Meter
Maxace 600 Static-Check Meter
    Maxace  600 Static-Check Meter

    Maxace  600 Static-Check Meter

    Maxace  600 Static-Check Meter is a simple, easy-to-use and inexpensive unit that indicates how much static is present on a person and that drains the charge to the connected ground. This unit can be held in the hand or mounted to a wall. Maxace 600 Static-Check Meter is the all-around audit tool for your protection against static. 

    Features of Maxace 600 Static-Check Meter:
    * Quick visual display of static from 0-19,990 volts 
    * Touch to test static in both positive and negative polarity 
    * Easy to ground by simultaneously touching 10mm snap contact 
    * Low battery indicator built into liquid crystal display (LCD) 
    * Micro-power circuit allows 9-volt alkaline battery to continuously display for approximately six months 
    * Conductive static-safe carrying case with protective anti-static foam included
    * Detects how much static a person is carrying 
    * Audits any potential static generator or dissipater including the following: 
    * Wrist straps, heel grounders, toe straps, static-safe shoes, chairs, table mats, floor mats, ground leads, purpose-built floors, garments, static sprays, floor finishes, the difference in potentialbetween two people or materials, etc.

    Specifications:
    * Watch the liquid crystal display indicated between 0-19,990 Volts of static charge +or - polarity
    * Operating voltage > 6.5 volte < 9 volts lowbt set at 6.5 volts
    * Operating: 5℃~49℃
    * Relative Humidity: 0%~90%
    * Accuracy: ±5%
    * Weight: 2 pounds
    * Size : 141/2 "X 9.0" X 31/3"